After installing a certain application to my phone tablet, I
noticed it has become too slow and sometimes not responding to touch and therefore
I decided to do "Factory Data Reset".
Everything went as expected and it was successful as you can
see on the picture below.
I re-installed the application from the backup file and I was now ready to resume normal services.
After doing several test I was happy to note that the tablet
is now faster and works like new.
Before long I received a phone call and noticed that there
was no ring tone and so I went straight to audio profiles, to my amazement I
noticed it was not set to silent mode and thought maybe it the volume which was
low.
So I slide it all the way up and
still nothing happened, no sound, I tried to play video and again no sound.
That is when I realized I have a problem here.
I started playing around with the gadget to find where I
have muted the audio without success.
The next move is to Google to see if
there is someone out there who might have encountered such a problem and indeed
I noticed it is a BIG issue to many folks out here.
I followed many advices given and nothing worked, one thing
I was sure of is that this problem has nothing to do with hardware since it happened
after the Factory data reset.
I became too busy trying to figure out where the master
reset audio is and again I was not lucky, so I decided to just reset the tablet
using the reset key at the side of the tablet as the last resort.
After resetting the tablet by inserting a pin on the small
hole at the side of this tablet solved the audio problem.
Kindly note that this hole is not same as the mike slot; in
most cases it is labeled RESET.
Thanks you guys